CEILING COOLING 
AND HEATING

Maintain the ideal temperature all year round - quietly, economically and without draughts. 
The Czech UNIVENTA system works on the principle of radiant cooling and heating through the ceiling.

Basic pricnip

Ceiling cooling

Cooling mats or pipes carrying 16 °C water are evenly distributed across the ceiling. The ceiling structure, whether plasterboard ceiling, plaster, metal cassettes or slats, effectively cools the building, creating a comfortable and stable environment. The cold accumulation makes the building better able to withstand temperature extremes, ensuring that there are no unpleasant temperature fluctuations inside.

Basic principle

Ceiling heating

The active ceiling construction system can also be used for heating. Today, higher demands on the quality of building structures make it possible to significantly reduce heat loss in houses. Thanks to the large active ceiling area, high heating performance is achieved. The radiant heat heats the surrounding structures evenly and creates a stable and comfortable temperature environment

Advantages of the technology

Cooling and heating through the ceiling

Bez průvanu a hlučnosti

Užívejte si příjemné klima bez ventilátorů a hlučné klimatizace. Stropní systém chladí přirozeně – bez proudění vzduchu.

Bez údržby a servisu

Na rozdíl od klimatizací nevyžaduje pravidelnou údržbu ani výměnu filtrů. 

Quiet operation

Systém využívá proudění vody ve stropě – neuslyšíte ho, ani když běží na plný výkon.

Skrytý v konstrukci

Žádné vnitřní jednotky ani mřížky. Čistý interiér a více prostoru pro design.

Úspora energie až 50 %

Díky nižším provozním teplotám spotřebuje až polovinu energie oproti běžné klimatizaci.

Dlouhá životnost systému

Polybutylenové potrubí má nejvyšší životnost ze všech používaných materiálů.

Technical solutions

  • DELGADO SDK Ceiling

    The system consists of DELGADO® thin cooling registers, which are placed on plasterboard and ensure simple and safe installation. For maximum performance, we recommend the use of gypsum plasterboards with increased thermal conductivity, containing graphite. The system uses standard metal construction for plasterboard ceilings using CD and UD metal profiles. DELGADO® registers are custom made to project specifications and cooling capacity can reach up to 70 W/m².
    The system consists of DELGADO® thin cooling registers, which are placed on plasterboard and ensure simple and safe installation. For maximum performance, we recommend the use of gypsum plasterboards with increased thermal conductivity, containing graphite. The system uses standard metal construction for plasterboard ceilings using CD and UD metal profiles. DELGADO® registers are custom made to project specifications and cooling capacity can reach up to 70 W/m².
    Show more
    Cooling performance EN 14240 (8.5 K)
    68 W/m²
    Heating capacity EN 14240 (15 K)
    79 W/m²
    Max. operating pressure
    6 bar
    Max. operating temperature
    50°C
    Water content
    0.7 l/m²
    View catalogue

  • DELGADO Metal Ceiling

    The system consists of DELGADO® thin cooling registers mounted on metal cassettes for easy and safe installation. DELGADO® registers are custom-made to project specifications and sized to fit the metal cassettes, with a cooling capacity of up to 75 W/m². For the acoustic cassette design, perforated DELGADO® registers are used to maintain the acoustic properties of the ceiling structure.
    The system consists of DELGADO® thin cooling registers mounted on metal cassettes for easy and safe installation. DELGADO® registers are custom-made to project specifications and sized to fit the metal cassettes, with a cooling capacity of up to 75 W/m². For the acoustic cassette design, perforated DELGADO® registers are used to maintain the acoustic properties of the ceiling structure.
    Show more
    Cooling performance EN 14240 (8.5 K)
    75 W/m²
    Heating capacity EN 14240 (15 K)
    89 W/m²
    Max. operating pressure
    6 bar
    Max. operating temperature
    50°C
    Water content
    0.7 l/m²
    View catalogue

  • ACTIVE Ceiling

    In the ACTIVE® Ceiling system, the cooling pipes are placed in the milled grooves of the plasterboard. The active cooling panels are available in standard sizes or are custom made to project specifications. These boards are installed on a standard metal structure designed for dropped ceilings, using CD profiles at 333mm centres. The cooling capacity of the system is 50 W/m². The cooling medium is water, which flows through a pipe located above the viewing surface of the room. This allows a clean and minimalist design to be maintained without visible technology in the interior.
    In the ACTIVE® Ceiling system, the cooling pipes are placed in the milled grooves of the plasterboard. The active cooling panels are available in standard sizes or are custom made to project specifications. These boards are installed on a standard metal structure designed for dropped ceilings, using CD profiles at 333mm centres. The cooling capacity of the system is 50 W/m². The cooling medium is water, which flows through a pipe located above the viewing surface of the room. This allows a clean and minimalist design to be maintained without visible technology in the interior.
    Show more
    Cooling performance EN 14240 (8.5 K)
    60 W/m²
    Heating capacity EN 14240 (15 K)
    70 W/m²
    Max. operating pressure
    4 bar
    Max. operating temperature
    50°C
    Water content
    0.7 l/m²
    View catalogue

  • PLASTER Ceiling

    The cooling pipes are built directly into the ceiling plaster, which is applied in combination with a 10-20 mm thick plaster or plaster core. DELGADO PLASTER cooling registers are made to measure according to project specifications. Pneumatic concrete shot blasting machines can be used for installation on the ceiling structure, ensuring a fast and efficient installation. Alternatively, the pipes can be inserted into the rails directly during installation. The cooling capacity can be up to 75 W/m², depending on the spacing of the pipes and the plaster mix used.
    The cooling pipes are built directly into the ceiling plaster, which is applied in combination with a 10-20 mm thick plaster or plaster core. DELGADO PLASTER cooling registers are made to measure according to project specifications. Pneumatic concrete shot blasting machines can be used for installation on the ceiling structure, ensuring a fast and efficient installation. Alternatively, the pipes can be inserted into the rails directly during installation. The cooling capacity can be up to 75 W/m², depending on the spacing of the pipes and the plaster mix used.
    Show more
    Cooling performance EN 14240 (8.5 K)
    75 W/m²
    Heating capacity EN 14240 (15 K)
    83 W/m²
    Max. operating pressure
    6 bar
    Max. operating temperature
    50°C
    Water content
    0.9 l/m²
    View catalogue

  • DELGADO Lamella

    The DELGADO Lamella ceiling is made of 30 mm wide steel slats with a standard thickness of 0.4 mm in steel or 0.5 mm in aluminium. The slats are easily clamped onto the omega support profiles, which are attached to the structural ceiling with adjustable noni hinges. The slats can be easily clicked into the mounting rails by hand and just as easily removed. The standard joint width of this ceiling is 20 mm, resulting in a module dimension of 50 mm. The perfect connection to the walls is achieved by installing edge profiles.
    The DELGADO Lamella ceiling is made of 30 mm wide steel slats with a standard thickness of 0.4 mm in steel or 0.5 mm in aluminium. The slats are easily clamped onto the omega support profiles, which are attached to the structural ceiling with adjustable noni hinges. The slats can be easily clicked into the mounting rails by hand and just as easily removed. The standard joint width of this ceiling is 20 mm, resulting in a module dimension of 50 mm. The perfect connection to the walls is achieved by installing edge profiles.
    Show more
    Cooling performance EN 14240 (8.5 K)
    94 W/m²
    Heating capacity EN 14240 (15 K)
    86 W/m²
    Max. operating pressure
    4-6 bar
    Max. operating temperature
    50°C
    Water content
    1.13 l/m²
    View product data sheet

Possibilities of using the system

Ceiling cooling and heating is becoming an increasingly popular cooling and heating option due to the growing popularity of alternative energy sources. Univenta DELGADO brings a number of advantages, from thermal comfort to installation, which is why its use is really wide.
Family houses
Flats
Reconstruction and loft conversions
Hotels and accommodation facilities
Development projects and apartment buildings
Public buildings - galleries, libraries
Offices
Schools and training centres
Healthcare
If you have any questions, please do not hesitate to contact us!
Write to us
UNIVENTA TZB s.r.o.
Příčná 84/1
779 00 Olomouc